Please join the waitlist by clicking here if you want to be notified when we have more kits in stock.
INCLUDED IN KIT:
1x Main Aluminum Bracket
2x Motor Mount Aluminum Bracket
1x Controller/Switch Mount Aluminum Bracket
2x Front Roller Aluminum Brackets/Arms
#25 Chain loop made to correct length
All Nuts & Bolts Required
FEATURES
Ability to power blades with 48VDC or 36VDC 1000W motor
Ability to add LED light bar
Ability to use front roller in place of wheels
Ability to keep stock wheels without using a front roller
KIT DOES NOT INCLUDE ALL COMPONENTS SHOWN IN PICTURES, ONLY THE COMPONENTS ABOVE ARE INCLUDED. THE PARTS LIST BELOW MAY BE USED AS A GUIDE FOR ADDITIONAL PARTS.
MOTOR:
Are you using two 20V batteries?
Then buy this motor: 36VDC Motor $65.00
Most 20V batteries are actually 18V with 20V max, it’s better to run a 36V motor in this case. You will still get 1000W.
Are you using a 40V or higher battery?
Then buy this motor: 48VDC Motor with Baseplate $65.96 or
Alternate amazon link, click here
This motor is sold out on amazon from time to time. If need you will have to go buy it on eBay with this link, if that does not work you can order the one on this page and order the 48V 1000W motor and make sure to add an 11 tooth #25 chain sprocket.
BATTERIES:
OR
CONTROLLER: Speed Controller $39.98
TERMINAL BOX: Elec. Terminal Box $13.99
CONTROLS BOX: Elec. Controller Box $11.79
CIRCUIT BREAKER: 20A Circuit Breaker $15.55
SWITCHES: 2x Switches $11.99
DRIVEN SPROKET: Sprocket #25 Chain 14mm Bore $15.25
IDLER SPROCKET: Idler Sprocket $12.99
Alternative Idler Sprocket if this one is sold out on Amazon click here
WIRE CONNECTORS: WAGO Connectors $24.75
STANDOFF: Wheel Standoff $11.49
FRONT ROLLER: Front Roller $28.00
BATTERY CHARGER:
Battery Charger (Single) $23.99 - if you don’t already have a battery charger, charges 1 battery at a time
Battery Charger (Double) $39.99 - charges 2 batteries at a time
Battery Charger (Quad) $69.99 - charges 4 batteries at a time
LED LIGHT: LED Light Bar $14.79 - if you want to add a front LED light
ELECTRICAL WIRE: Elec. Wire Twin R&B 14AWG $16.99 - if you don’t have your own electrical wire
WIRE TUBE: Wire Tubing $17.99 - if you want to insulate your electrical wire (NOT REQUIRED)
WIRE STRIPPER: Wire Stripper $8.99 - you will need one if you do not already have one
As an Amazon Associate we earn from qualifying purchases. The links above earn us a small commission, however, the cost of individual products are NOT increased in order to do so.
reelCNC LLC only supplies and designs the brackets included in this kit and does not assume any responsibility for how these supplied parts are used. reelCNC LLC reserves the right to modify the design of supplied components without notice. The selection, application, and usage of other components is the responsibility of the end user. The end user is responsible for all safety precautions. reelCNC LLC does not warranty or guarantee the functionality of any system of components used by the end user.
Please join the waitlist by clicking here if you want to be notified when we have more kits in stock.
INCLUDED IN KIT:
1x Main Aluminum Bracket
2x Motor Mount Aluminum Bracket
1x Controller/Switch Mount Aluminum Bracket
2x Front Roller Aluminum Brackets/Arms
#25 Chain loop made to correct length
All Nuts & Bolts Required
FEATURES
Ability to power blades with 48VDC or 36VDC 1000W motor
Ability to add LED light bar
Ability to use front roller in place of wheels
Ability to keep stock wheels without using a front roller
KIT DOES NOT INCLUDE ALL COMPONENTS SHOWN IN PICTURES, ONLY THE COMPONENTS ABOVE ARE INCLUDED. THE PARTS LIST BELOW MAY BE USED AS A GUIDE FOR ADDITIONAL PARTS.
MOTOR:
Are you using two 20V batteries?
Then buy this motor: 36VDC Motor $65.00
Most 20V batteries are actually 18V with 20V max, it’s better to run a 36V motor in this case. You will still get 1000W.
Are you using a 40V or higher battery?
Then buy this motor: 48VDC Motor with Baseplate $65.96 or
Alternate amazon link, click here
This motor is sold out on amazon from time to time. If need you will have to go buy it on eBay with this link, if that does not work you can order the one on this page and order the 48V 1000W motor and make sure to add an 11 tooth #25 chain sprocket.
BATTERIES:
OR
CONTROLLER: Speed Controller $39.98
TERMINAL BOX: Elec. Terminal Box $13.99
CONTROLS BOX: Elec. Controller Box $11.79
CIRCUIT BREAKER: 20A Circuit Breaker $15.55
SWITCHES: 2x Switches $11.99
DRIVEN SPROKET: Sprocket #25 Chain 14mm Bore $15.25
IDLER SPROCKET: Idler Sprocket $12.99
Alternative Idler Sprocket if this one is sold out on Amazon click here
WIRE CONNECTORS: WAGO Connectors $24.75
STANDOFF: Wheel Standoff $11.49
FRONT ROLLER: Front Roller $28.00
BATTERY CHARGER:
Battery Charger (Single) $23.99 - if you don’t already have a battery charger, charges 1 battery at a time
Battery Charger (Double) $39.99 - charges 2 batteries at a time
Battery Charger (Quad) $69.99 - charges 4 batteries at a time
LED LIGHT: LED Light Bar $14.79 - if you want to add a front LED light
ELECTRICAL WIRE: Elec. Wire Twin R&B 14AWG $16.99 - if you don’t have your own electrical wire
WIRE TUBE: Wire Tubing $17.99 - if you want to insulate your electrical wire (NOT REQUIRED)
WIRE STRIPPER: Wire Stripper $8.99 - you will need one if you do not already have one
As an Amazon Associate we earn from qualifying purchases. The links above earn us a small commission, however, the cost of individual products are NOT increased in order to do so.
reelCNC LLC only supplies and designs the brackets included in this kit and does not assume any responsibility for how these supplied parts are used. reelCNC LLC reserves the right to modify the design of supplied components without notice. The selection, application, and usage of other components is the responsibility of the end user. The end user is responsible for all safety precautions. reelCNC LLC does not warranty or guarantee the functionality of any system of components used by the end user.
